Solis 8KW Hybrid Pro Solar Inverter
In stock
Model: S6-EH1P-8-K-L-Pro
PKR295,000.00
Product Description
Solis 8KW Hybrid Pro Solar Inverter (S6-EH1P8K-L-PRO)
The Solis S6-EH1P8K-L-PRO is a new-generation 8kW single-phase low voltage hybrid solar inverter engineered for demanding power scenarios in residential and light commercial applications. Featuring dual MPPT inputs with 3 string support, an industry-leading 190A max charge/discharge current, and intelligent redundant fan-cooling, this inverter delivers exceptional performance under Pakistan's challenging grid and climate conditions. With automatic UPS switching under 4ms, generator connectivity with auto On/Off control, and IP66 weatherproof protection, the Solis 8KW Hybrid Pro is built for maximum reliability and energy independence.
Key Features
- 8kW Rated Output with 200% Surge Capability: Handles heavy loads and motor startups with 10-second 200% surge power backup overload support.
- Automatic UPS Switching (<4ms): Near-instantaneous switchover ensures sensitive equipment stays protected during grid outages.
- Generator Connectivity: Multiple input methods with automatic generator On/Off control for seamless backup power integration.
- Dual MPPT with 3 String Support: Two independent MPPT channels (90–520V range) with up to 3 input strings for maximum solar harvest flexibility.
- Up to 190A Max Charge/Discharge Current: Industry-leading battery current rating supports fast charging and high discharge rates for the most demanding load scenarios.
- Intelligent Redundant Fan-Cooling: Active thermal management ensures stable operation in high-temperature environments.
- IP66 Weatherproof Rating: Fully protected against dust and water jets — suitable for outdoor wall mounting in Pakistan's climate.
- 6 Customisable Charge/Discharge Time Settings: Flexible scheduling for peak shaving in both self-use and generator modes.
- Parallel Operation up to 48kW: Supports 1-phase and 3-phase flexible parallel connection for larger system requirements.
| Model | S6-EH1P8K-L-PRO |
|---|---|
| Input DC (PV Side) | |
| Recommended Max. PV Array Size | 16 kW |
| Max. Usable PV Input Power | 12.8 kW |
| Max. Input Voltage | 600 V |
| Rated Voltage | 330 V |
| Start-up Voltage | 90 V |
| MPPT Voltage Range | 90 – 520 V |
| Max. Input Current | 32 A / 20 A |
| Max. Short Circuit Current | 36 A / 30 A |
| MPPT Number / Max. Input Strings | 2 / 3 |
| Battery | |
| Battery Type | Li-ion / Lead-acid |
| Battery Voltage Range | 40 – 60 V |
| Max. Charge / Discharge Power | 8 kW |
| Max. Charge / Discharge Current | 190 A |
| Communication | CAN / RS485 |
| Output AC (Grid Side) | |
| Rated Output Power | 8 kW |
| Max. Apparent Output Power | 8.8 kVA |
| Operation Phase | 1/N/PE |
| Rated Grid Voltage | 220 V / 230 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| Rated Grid Output Current | 36.4 A / 34.8 A |
| Max. Output Current | 40 A |
| Power Factor | > 0.99 (0.8 leading – 0.8 lagging) |
| THDi | < 2% |
| Input AC (Grid Side) | |
| Input Voltage Range | 187 – 253 V |
| Max. Input Current | 50 A |
| Frequency Range | 45 – 55 Hz / 55 – 65 Hz |
| Output AC (Back-up) | |
| Rated Output Power | 8 kW |
| Max. Apparent Output Power | 2 × Rated Power, 10 s |
| Back-up Switch Time | < 4 ms |
| Rated Output Voltage | 1/N/PE, 220 V / 230 V |
| Rated Frequency | 50 Hz / 60 Hz |
| Rated Output Current | 36.4 A / 34.8 A |
| Max. Output Current | 40 A |
| Max. AC Passthrough Current | 50 A |
| THDv (@ Linear Load) | < 2% |
| Efficiency | |
| Max. Efficiency | > 96.9% |
| EU Efficiency | > 96.5% |
| Protection | |
| DC Reverse-Polarity Protection | Yes |
| Ground Fault Monitoring | Yes |
| Integrated AFCI (DC Arc-Fault Circuit Protection) | Yes (activation required) |
| Protection Class / Over Voltage Category | I / II (PV & BAT), III (MAINS, BACKUP & GEN) |
| General Data | |
| Dimensions (W × H × D) | 406 × 560 × 215 mm |
| Weight | 26 kg |
| Topology | High Frequency Isolation (for battery) |
| Operating Ambient Temperature Range | -40 ~ +60°C |
| Ingress Protection | IP66 |
| Cooling Concept | Intelligent Redundant Fan-Cooling |
| Max. Operation Altitude | 4000 m |
| Grid Connection Standard | NRS 097-2-1, IEC 62116, IEC 61727, IEC 60068, IEC 61683, EN 50530, MEA, PEA |
| Safety / EMC Standard | IEC/EN 62109-1/-2, EN 61000-6-2/-3 |
| Connectivity & Features | |
| DC Connection | MC4 Plug (PV Port) / Terminal Block (BAT Port) |
| AC Connection | Terminal Block |
| Display | LED + APP |
| Communication | RS485, CAN, Optional: Wi-Fi, GPRS, LAN |
| Download Official Datasheet | Download PDF |
EN-PK-260307